Alvarion Wi^2 AP CLI Dokumentacja Pobierz pdf (Strona 205)

Controlled Mode Wireless Interface Context

Wi² Controller CLI Reference Guide 179

beacon interval

Supported on: Wi ²-CTRL-10 Wi ²-CTRL-40 Wi ²-CTRL-200

beacon interval <value>

Sets the beacon interval.

Parameters

< value> Beacon interval value in the range 20 and 500 time

units (TU) (1 TU = 1024us).

rts threshold

Supported on: Wi ²-CTRL-10 Wi ²-CTRL-40 Wi ²-CTRL-200

rts threshold <value>

Sets the RTS threshold.

no rts threshold

Deletes the RTS threshold value.

Parameters

< value> Threshold value in the range 128 and 1540.

Description

Use this parameter to control collisions on the link that can reduce

throughput. If the Status Wireless page on the management tool shows

increasing values for Tx multiple retry frames or Tx single retry frames, you

should adjust this value until the errors clear up. Start with a value of 1024

and then decrease to 512 until errors are reduced or eliminated.

Using a small value for RTS threshold can affect throughput.

If a packet is larger than the threshold, the Controller will hold it and issue a

request to send (RTS) message to the client station. Only when the client

station replies with a clear to send (CTS) message will the Controller send

the packet. Packets smaller than the threshold are transmitted without this

handshake.

dot11 mode

Supported on: Wi ²-CTRL-10 Wi ²-CTRL-40 Wi ²-CTRL-200

dot11 mode (monitor | ap+wds | ap-only | wds-only | sensor)

Sets the operating mode for the radio.

radio active

Supported on: Wi ²-CTRL-10 Wi ²-CTRL-40 Wi ²-CTRL-200

radio active

Enables the radio.

no radio active

Disables the radio.

1 2 ... 200 201 202 203 204 205 206 207 208 209 210 211 212

Brak uwag

Alvarion Wi^2 AP CLI Dokumentacja Strona 205