Alvarion Wi^2 AP CLI Dokumentacja Pobierz pdf (Strona 188)

162 Wi² Controller CLI Reference Guide

Chapter 2 - CLI Commands

Description

For these methods to work, the following must be true:

• The Controller must be able to reach the RF Manager Server via a network

connected to port 1 or port 2. For example, you should be able to ping the

RF Manager Server‚Äôs IP address from the Controller.

• If there are any firewalls between the Controller and the RF Manager

Server, then TCP and UDP ports 3851 must be open bi-directionally.

• If using the hostname option, an entry must be created on the network

DNS server that points to the IP address of the RF Manager Server.

• If using the Server ID option, support for multicast traffic must be enabled

on all routers and switches connected between the Controller and the RF

Manager Server.

sensor network detector

Supported on: Wi ²-CTRL-10 Wi ²-CTRL-40 Wi ²-CTRL-200

sensor network detector

Enable the Network Detector.

no sensor network detector

Disable the Network Detector.

inherit sensor

Supported on: Wi ²-CTRL-10 Wi ²-CTRL-40 Wi ²-CTRL-200

inherit sensor

Inherit sensor settings from parent.

no inherit sensor

Do not inherit sensor settings from parent.

dynamic key

Supported on: Wi ²-CTRL-10 Wi ²-CTRL-40 Wi ²-CTRL-200

dynamic key

Enables dynamic key support for 802.1X and WPA.

no dynamic key

Disables dynamic key support for 802.1X and WPA.

dynamic key interval

Supported on: Wi ²-CTRL-10 Wi ²-CTRL-40 Wi ²-CTRL-200

dynamic key interval (5m | 10m | 15m | 30m | 1h | 2h | 4h | 8h |

12h)

Specifies how often (in minutes or hours) that the group (broadcast) key is

changed for 802.1X and WPA.

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 211 212

Brak uwag

Alvarion Wi^2 AP CLI Dokumentacja Strona 188