Alvarion BreezeACCESS II Instrukcja Użytkownika Strona 2
- Strona / 4
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
BreezeACCESS II Base Station Equipment -
Core technology, elemental strength
BreezeACCESS II provides a Base Station and three types of Access
Units, delivering superior flexibility in architecture and network
deployment.
All Access Units are connected to the subscriber's data equipment
via a standard IEEE 802.3 Ethernet 10BaseT (RJ 45) interface.
Base Station Shelf
The 19" Base Station shelf
(BS-SH) can hold up to six
BS-AU modules, providing
reliable access to maximum
numbers of subscribers.
The BS-AU modules can be synchronized to ensure optimal utilization
of the available frequency spectrum.
In addition, the Base Station shelf includes up to two redundant power
supply modules, which are served by either a -48 VDC or a 110/220
VAC power source.
A GPS synchronization system allows accurate synchronization of
BreezeACCESS base stations located on different sites.
Indoor/Outdoor Access Units
The BreezeACCESS II indoor/outdoor
Access Unit configuration includes
an indoor module and outdoor unit
that contains the radio and antenna
units. Data, power, management
and control signals are transmitted
from the indoor unit to the outdoor
unit via a coaxial cable.
The indoor/outdoor Access Units are available
with either 26dBm (HP-High Power) or 2dBm (LP-Low Power)
output power at the antenna port.
The outdoor units feature two antenna options, as follows:
• AU-A-BS units: Comprise an indoor module and outdoor unit,
which contains a radio unit and integrated panel antenna.
• AU-E-BS units: Feature an indoor module and outdoor unit,
which contains a radio unit and an RF connector for a separate
external antenna.
Miniature Indoor Access Units
Optimized for indoor installations, the miniature
indoor units are designed to fit on a desktop
or mounted on the wall and are powered from
the mains (100-250 VAC).
The indoor Access Units (AU-ID) include two RF connectors for
detached diversity antennas.
Stand-Alone "Micro Cell" Access Units
The Micro Cell Access Units are stand-alone modules that connect
to the same outdoor units as described in the Indoor/Outdoor
Access Units configuration. The indoor units are designed to fit
on a desktop or mount on the wall and are powered from the
mains. Data, power, management and control signals are transmitted
from the indoor unit to the outdoor unit via a coaxial cable.
The outdoor units feature two antenna options, as follows:
• AU-A-NI units: Comprise an indoor module and outdoor unit,
which contains a radio unit and integrated antenna.
• AU-E-NI units: Feature an indoor module and outdoor unit,
which contains a radio unit and an RF connector for a separate
external antenna.
Demand-based build-out, easy installation and low cost
of ownership enables rapid market penetration, increased
subscription and enhanced value-added services.
Packet switching technology optimized for IP-based
applications and ”always on” connectivity.
Frequency Hopping Spread Spectrum (FHSS) radio
technology provides unlimited cell overlay capacity and
seamless integration between cells, eliminating capacity
planning or performance degradation when adding new
subscribers. In addition, FHSS is not susceptible to
interference from other technologies operating in the
same 2.4GHz ISM band
Adaptive Circuit Switched Emulation (ACSE) air protocol
maintains the efficiency of IP transmission, while reserving
specific time slots for active voice call traffic.
Fast packet-based data transmission and toll quality for
delay and jitter sensitive telephony.
Highly cost effective infrastructure and customer premises
equipment.
Toll quality voice with integrated RJ11 voice ports in
subscriber units.
Advanced telephony features when used in conjunction
with a V5.1 gateway.
802.1P enables delay sensitive traffic to be prioritized in
the network.
802.1Q VLANs separate traffic into virtual private networks.
Independent uplink/downlink transmission settings for
CIR/MIR, enabling assured and differentiated QoS.
Carrier grade features including a rack mount chassis
base station with redundancy, hot swap capability and
UPS facilities.
Easy-to-use SNMP-based remote management system,
enabling simple unit configuration and multiple
simultaneous unit upgrading.
Product Highlights
BreezeACCESS II System Components
BreezeACCESS II CPEs - Equipped to perform
The BreezeACCESS II series of Customer Premises Equipment
(CPE) features both data plus voice and data-only capabilities.
The BreezeACCESS II family of CPEs comprises two types of
subscriber unit configuration options, which enable service
providers to optimize their network architecture for greater
subscriber reach and satisfaction.
Both indoor and indoor/outdoor configuration options connect
to the subscriber's data equipment via a standard IEEE 802.3
Ethernet 10-BaseT (RJ 45) interface. Telephony services are
supported using a standard POTS (RJ 11) interface connected
directly to the subscriber's telephone.
Miniature Indoor Units
Optimized for indoor installations, the miniature
indoor units are designed to fit conveniently
on a desktop or mounted easily on the wall.
BreezeACCESS provides SU-ID or SU-R units
that feature two RF connectors for detached diversity antennas.
Indoor/Outdoor Units
The BreezeACCESS II indoor/outdoor option includes an indoor
desktop or wall-mountable unit and an outdoor antenna and
radio unit.
Data, power, management and control signals are transmitted
from the indoor unit to the outdoor unit via a coaxial cable.
The outdoor units feature two antenna options, delivering
enhanced network flexibility, as
follows:
• SU-A units: Comprise a radio
module and integrated flat panel
antenna.
• SU-E units: Include a radio
module and RF connector for a
separate external antenna.
Both types of outdoor units are
available with either 26dBm (HP-High Power) or 2dBm (LP-Low
Power) output power at the antenna port.
Subscriber units are available with single telephone line support
Unrestricted access, unlimited choice.
BreezeACCESS II
BreezeACCESS II delivers a
comprehensive range of product
features, ensuring fast, consistent and
reliable data and voice service, including
Product Type Product Name Product Description
Miniature Indoor SU-ID-1D-2.4 Detached antenna - 1 data user
Subscriber Units SU-ID-BD-2.4 Detached antenna - full bridge
SU-R-1D-2.4 Detached antenna - 1 data user
SU-R-BD-2.4 Detached antenna - full bridge
Subscriber Units
SU-A-1D-2.4 Integrated antenna - 1 data user
with an Outdoor SU-E-1D-2.4 Detached antenna - 1 data user
Radio Unit SU-A-BD-2.4 Integral antenna - full bridge
SU-E-BD-2.4 Detached antenna - full bridge
Product Type Product Name Product Description
Base Station Shelf BS-SH Base station chassis with
one DC power supply
BS-SH-AC Base station chassis with
one AC power supply
Outdoor Access AU-A-BS-2.4 Includes base station module and
Units for use outdoor unit with integrated antenna
with Base Station AU-E-BS-2.4 Includes base station module and
outdoor unit with connectors for
external antenna
Stand-alone AU-E-NI-2.4 Includes indoor unit and outdoor unit
Access Point with connectors for external antenna
Power Supply BS-PS Base station DC power supply
BS-PS-AC Base station AC power supply
GPS GU-A-BS Includes synchronization
Synchronization card and outdoor GPS radio
System unit with integrated antenna
SU-A-BD
SME/SOHO
Residential
SU-A-1D1V
Powiązane produkty i podręczniki dla Oprogramowanie Alvarion BreezeACCESS II
(209 strony)© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 1.492 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji